Click for Data Doubler kits!
A Click on this Banner shows your site support to my Sponsors
Inside the PowerCenter Pro How to Add/Remove PCI Cards: To get access to the PCI slots to add or remove a card, you must turn the case upside down, and remove the baseplate.
The baseplate is retained by four screws at the case corners.
Remove any CDrom that may be in the drive before you invert the case.
With the baseplate removed you can then see the inverted PCI slots.
Take care when inserting or removing PCI cards that you don't unseat the Video Riser from it's connector on the motherboard.
The card with the wide ribbon cable is the Adaptec 2930 PCI SCSI controller.
Want to know how to remove the CPU card?
Yes - show me!
Index of PowerCenter Pro Pages
Copyright © 1997, All Rights Reserved.
Thanks to my wife for tolerating all the time I spend on this site.
All brand or product names mentioned here are properties of their respective companies.
Legal: site terms and conditions of use.